2016-06-01 11:34:14 -04:00
XT to USB keyboard converter
2016-03-02 00:37:22 -05:00
==============================
2016-06-01 11:34:14 -04:00
This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
2016-03-02 00:37:22 -05:00
Connect Wires
-------------
1. Connect **Vcc** and **GND** .
2018-04-24 13:57:29 -04:00
2. Connect **Clock** and **Data** line. **Clock** is on `PD1` , **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset** .(Compatible to Soarer's converter) To change pin configuration edit `config.h` .
3. You need pull-up resistor. **1K-10K Ohm** will be OK.
2016-03-02 00:37:22 -05:00
Build Firmware
--------------
2018-04-24 13:57:29 -04:00
Just run `make` :
2016-03-02 00:37:22 -05:00
$ make clean
$ make
2018-04-24 13:57:29 -04:00
To use your own keymap create `keymap_<name>.c` file and then:
2016-03-02 00:37:22 -05:00
$ make clean
2018-04-24 13:57:29 -04:00
$ make KEYMAP=< name >
After that you will find HEX file `xt_usb.hex` in current directory.
2016-03-02 00:37:22 -05:00
2018-04-24 13:57:29 -04:00
See wiki pages on github for further information. https://github.com/tmk/tmk_keyboard/wiki
2016-03-02 00:37:22 -05:00
2018-04-24 13:57:29 -04:00
XT keyboard protocol resource
------------------------------
https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol
