Add documentation to the three default keymaps

keyboards/anne_pro/keymaps/arrow/readme.md

@@ -0,0 +1,22 @@
+# Anne Pro Arrow keymap
+
+### Maintainer: [msvisser](https://github.com/msvisser)
+
+This keymap is the arrows keymap supplied on the original Anne Pro firmware.
+However the interface for Bluetooth is changed slightly.
+
+### Bluetooth
+To enable the Bluetooht layer press `FN+B`.
+
+While in the Bluetooth layer:
+- `ESC` - Exit Bluetooth layer
+- `1, 2, 3, 4` - Connect to saved profile
+- `Q, W, E, R` - Save connection to profile
+- `A, S, D, F` - Delete saved connection
+- `0` - Toggle legacy Bluetooth mode
+- `-` - Disable Bluetooth
+- `+` - Enable Bluetooth
+
+Finally the lighting on the `ESC` key tries to indicate the connection status
+of the Bluetooth. However this might sometimes go out of sync. To update the
+connection status press the left `CTRL` key.

keyboards/anne_pro/keymaps/default/readme.md

@@ -0,0 +1,22 @@
+# Anne Pro Default (Windows) keymap
+
+### Maintainer: [msvisser](https://github.com/msvisser)
+
+This keymap is the default Windows keymap supplied on the original Anne Pro
+firmware. However the interface for Bluetooth is changed slightly.
+
+### Bluetooth
+To enable the Bluetooht layer press `FN+B`.
+
+While in the Bluetooth layer:
+- `ESC` - Exit Bluetooth layer
+- `1, 2, 3, 4` - Connect to saved profile
+- `Q, W, E, R` - Save connection to profile
+- `A, S, D, F` - Delete saved connection
+- `0` - Toggle legacy Bluetooth mode
+- `-` - Disable Bluetooth
+- `+` - Enable Bluetooth
+
+Finally the lighting on the `ESC` key tries to indicate the connection status
+of the Bluetooth. However this might sometimes go out of sync. To update the
+connection status press the left `CTRL` key.

keyboards/anne_pro/keymaps/macos/readme.md

@@ -0,0 +1,22 @@
+# Anne Pro macOS keymap
+
+### Maintainer: [msvisser](https://github.com/msvisser)
+
+This keymap is the macOS keymap supplied on the original Anne Pro firmware.
+However the interface for Bluetooth is changed slightly.
+
+### Bluetooth
+To enable the Bluetooht layer press `FN+B`.
+
+While in the Bluetooth layer:
+- `ESC` - Exit Bluetooth layer
+- `1, 2, 3, 4` - Connect to saved profile
+- `Q, W, E, R` - Save connection to profile
+- `A, S, D, F` - Delete saved connection
+- `0` - Toggle legacy Bluetooth mode
+- `-` - Disable Bluetooth
+- `+` - Enable Bluetooth
+
+Finally the lighting on the `ESC` key tries to indicate the connection status
+of the Bluetooth. However this might sometimes go out of sync. To update the
+connection status press the left `CTRL` key.