steven-y-e
/
qmk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Get USB working

anne_pro
Michiel Visser 2019-06-23 15:15:36 +02:00
parent dd5236cff2
commit b98375ce5a
1 changed files with 6 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
keyboards/anne_pro/boards/STM32L151_ANNE_PRO/board.h
View File

@ -258,8 +258,8 @@
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_HIGH(GPIOA_USB_DM) | \
PIN_OSPEED_HIGH(GPIOA_USB_DP) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_JTAG_TMS) | \
PIN_OSPEED_HIGH(GPIOA_JTAG_TCK) | \
PIN_OSPEED_HIGH(GPIOA_JTAG_TDI))
@ -274,8 +274,8 @@
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_PULLUP(GPIOA_USB_DM) | \
PIN_PUPDR_PULLUP(GPIOA_USB_DP) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_JTAG_TMS) | \
PIN_PUPDR_PULLDOWN(GPIOA_JTAG_TCK) | \
PIN_PUPDR_PULLUP(GPIOA_JTAG_TDI))
@ -290,8 +290,8 @@
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_LOW(GPIOA_USB_DM) | \
PIN_ODR_LOW(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_JTAG_TMS) | \
PIN_ODR_HIGH(GPIOA_JTAG_TCK) | \
PIN_ODR_HIGH(GPIOA_JTAG_TDI))
@ -897,31 +897,6 @@
PIN_AFIO_AF(GPIOH_PIN14, 0U) | \
PIN_AFIO_AF(GPIOH_PIN15, 0U))
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) while(0) { palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); }
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {