#ifndef CONFIG_H
#define CONFIG_H

#define GAMETYPE 1               //0:pop'n with card dispenser 1: pop'n, drummania(1 reader) 2:iidx/ddr sd/gf(2readers) 3:jubeat (1reader+Ledboard) 4: sdvx (1reader+ioboard) 5: ddr hd (2readers + ??? board)

#define RFID_BAUD 115200		//Baud rate for RFID Module

#define RFID_MODULE1 3			//Rfid module used for reader1, 1:SL015M 2:RR10 3:PN5180
#define RFID_MODULE2 3			//Rfid module used for reader2, 1:SL015M 2:RR10 3:PN5180

#define SDVX_VOL_SENS 7        //Sensitivity for SDVX Volume buttons


//input pins for sdvx controls
#define BT_FXR A0
#define BT_FXL A1
#define BT_A A2
#define BT_B A3
#define BT_C A4
#define BT_D A5
#define BT_START 52
#define BT_TEST 50
#define BT_SVC 48

//input pins for volume encoders (phase A and phase B for each)
#define VOLR_A 36
#define VOLR_B 38
#define VOLL_A 40
#define VOLL_B 42

//pins for sdvx lights (outputs)
#define LT_START 53
#define LT_A 51
#define LT_B 49
#define LT_C 47
#define LT_D 43
#define LT_FXL 41
#define LT_FXR 39

//pins for sdvx/jubeat RGB LEDs (use PWM pins)
#define LED1_R 7
#define LED1_G 6
#define LED1_B 5

#define LED2_R 10
#define LED2_G 9
#define LED2_B 8

#define LED3_R 13
#define LED3_G 12
#define LED3_B 11

#define LED4_R 4
#define LED4_G 3
#define LED4_B 2

#define LED5_R 46
#define LED5_G 45
#define LED5_B 44

#define LED6_R A8
#define LED6_G A9
#define LED6_B A10
//pins for card reader 1 keypad (colls ABC, rows 1234)
/*
### Keypad 3x4 Matrix ###

 (7)---(8)---(9)---> ROW 4
  |     |     |
 (4)---(5)---(6)---> ROW 3
  |     |     |
 (1)---(2)---(3)---> ROW 2
  |     |     |
 (0)--(00)--([])---> ROW 1
  |     |     |
  V     V     V
COL C  COL B  COL A

*/
#define K1_A 27
#define K1_B 25
#define K1_C 23
#define K1_1 29
#define K1_2 31
#define K1_3 33
#define K1_4 35


//pins for card reader 1 RFID Module
#define R1_DET 20
#define R1_SER Serial1

//pins for card reader 2 keypad (colls ABC, rows 1234)
#define K2_A 26
#define K2_B 24
#define K2_C 22
#define K2_1 28
#define K2_2 30
#define K2_3 32
#define K2_4 34


//pins for card reader 2 RFID Module
#define R2_DET 21
#define R2_SER Serial2

//pins for PN5180 RFID Module
#define PN5180_NSS_PIN  10
#define PN5180_BUSY_PIN 9
#define PN5180_RST_PIN  7

#endif